-
Hi
I now there are thousands of posts already asking the same (how to flash 2560 with esplink!?) but either their solution didn't worked for me or I didn't understand the solution. My main goal wil…
-
Hi buddy, i've been following your "issue" topic on the p710 flashing problem.
I was researching exactly the same thing because i try for days to crossflash a Intel integrated 2208 raid card ( for…
Adefx updated
11 months ago
-
Folks,
I'm writing after 8 or so hours of tinkering with F103FB and F103RE variants. I have a custom board with STM32F103RET6. Using blink.ino and STLINK (no maple bootloader), using the STM32F103RB…
-
Hello - I understand this is Off Topic but would really appreciate some help. Newbie Alert.
I got this camera about a month back. About 2 weeks back, this camera dropped off the network. I could no…
-
Here is a high resolution picture of a dyson v10 batterypack PCB.
…
-
Hey there, IMSProg is great; thank you for creating it. I thought it might help others access IMSProg if I packaged it for the AUR, which I've now done: https://aur.archlinux.org/packages/imsprog. You…
-
There are some compiler warnings.
@stefanrueger
Please take a look. Probably not so important.
Build log:
```
netbsd10vm$ cc -v
Using built-in specs.
COLLECT_GCC=cc
COLLECT_LTO_WRAPPER=/u…
mcuee updated
2 months ago
-
Want to know if you may be able to make a next release will support Alder Lake U in later release? I bought a Pentium Gold 8505 based machine (倍控 G31F) and is struggling with this issue, and I don't …
-
Hi,
I ran into this code of yours just as I bought a nRF24LE1 breakout board and a Bus Pirate v3, and decided to give it a go.
However, when I try to upload a simple program to the controller, this i…
-
Hi, i bricked my LG 38WN95CP-W by trying to switch the input with ddcutil. Now it stays black with no osd.
I tried to do a hard reset (remove power + wait + press the button 10 sec) and i also tried…