-
Hi Thomas,
sometime, during day time, the image seems to be scrambled (i.e.: https://www.dropbox.com/s/r5mzjbjqhigx09h/allsky_error.jpg?dl=0). I've enabled auto exposure and the auto gain is disabled…
-
I have a small intel based SBC, But because this project is setup for ARM, it doesn't compile. What would be involved in porting it to Intel?
Ive learned that my ASI 174mm just isn't stable on the…
-
Nighttime images black, no apparent way to lighten. tried manual gain settings, exposure, etc. This did seem to work properly before running the latest release.
Camera ZWO ASI224MC
-
I am trying to set up my allsky with a new RPi HQ camera. When I run to check the status of the camera nothing shows in the liveview window. If I run "sudo service allsky status" i get the following r…
-
I'm not really sure how to explain other than that - I don't remember it looking flipped in the past, but it seems like its flipped across the horizontal axis. I don't think I changed anything (other …
-
Hi, Ive installed the allsky on RPi 4 1GB RAM 64GB SD card. It is working except it is not capturing.
```
Apr 5 22:50:11 allskycam01 allsky.sh[1789]: CAMERA_SETTINGS: /etc/raspap/settings_ZWO.js…
-
Hi,
I can not get a picture from the ASI224MC. It worked before with 0.6.
I checked the camera, is ok. I have enough 5V power and so on. I belief I did all the configuration right, but you never…
ggtux updated
3 years ago
-
Hi,
Would anyone be able to point me in the right direction to solve the Timelapse generated being only 4kB and not containing any image sequence? It seems to have been generated at the right time…
-
Good morning.
my name is Salvador Aguirre (drsaguirre@gmail.com) I have finished assembling the all sky camera.
I have already sent photos and more information about my location on the respectiv…
-
I am using the R Pi HQ camera, and the AllSky Admin Panel, Configure Camera Settings doesn't display the settings. It only has boxes for "Save Changes" and "Reset to default values".