-
I have a Sonoff Basic, I02 for light switch, a MCP23017 I2C Serial Interface to expand the GPIO’s, on the I2C bus I have:
GY-BME280 Temperature Humidity Sensor
GY-302 BH1750 Light Intensity Illumi…
-
Let me start by saying that I'm obviously full of admiration for the work You put in.
Personally, I think it's a great solution
However, recently this program is so unstable that I would consider …
-
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
Docker running on a Raspberry Pi (using docker compose)
```
version: "3.4"
services:
esphome:
container_name: esph…
-
### BUG DESCRIPTION
Tested with Tasmota development 6.4.1.20 and latest stable on multiple Node-MCU v1/ Amica boards which have the following sensors attached (GPIO …
-
## Mycodo Issue Report:
- Specific Mycodo Version: 6.4.5(issue happening on 6.4.4 as well)
### Problem Description
I have added a BH1750 light sensor in the Data page under setup but when look…
-
### Hardware:
Board: ESP32 Dev Module wroom
IDE name: Arduino IDE?
Flash Frequency: 40Mh
PSRAM enabled: no
Upload Speed: 1…
-
Hello
I have a little Problem with the BH1750 Sensor.
It is set up and works in tasmota
![grafik](https://user-images.githubusercontent.com/6001498/45916000-f7e54080-be5e-11e8-9c48-6f632d867780.png…
-
'ascii' codec can't decode byte 0xe1 in position 24: ordinal not in range(128)
-
This issue lists the status of all tests for the [Release Candidate 1 of the 2020.07](https://github.com/RIOT-OS/RIOT/releases/tag/2020.07-RC1) release.
Specs tested:
- [ ] [01-ci](https://github.…
-
### Checklist
- [x] The title of this issue is "to the point" and descriptive.
- [x] This issue describes what is happening.
- [ ] This issue describes what components are affected (e.g. name of pl…