-
Hi developers,
I'm reaching out to you requesting the possibility of adding metadata information through direct video so that external hardware such as scalers can use that information. A use case is…
-
### The problem
I have set up a speaker with voice assistant, which works as fare as possible when I don't enable Ipv6.
But when enabling Ipv6, API connection is reset, making impossible to use the …
-
### Reproduction steps
I used: IDF 5.0.1, MacOS, chip M1
1. Run the command
```
idf.py build
```
2. Got the error
```
[1/1] cd /Users/df/matter/connectedhomeip/examples/lighting-app/esp32/bu..…
-
Hi I really like the project, I have been looking for something like this for a long time.
My question is, can I rewrite the "Voltage" and "Coolant temp" on the display to read "Feszültség" and "Hűtő…
-
I am trying to use the UART async API on stm32f7. It works nicely up to about 460.8kbps, but above that I start loosing characters during buffer switch. I immediately provide new buffers when requeste…
hjuul updated
9 months ago
-
Does anyone experiencing this issue?
cspot bitrate 320Kbps
currently running : 2.1652-16#v4.3#I2S-4MFlash#master-v4.3 on ESP32-CAM with 16Mflash & 8M PSRAM
Thankyou.
-
Hi all,
I'm a bit stuck. For a while I've been trying to get Swift to build for my ESP32 C6, but it keeps getting stuck in one of the last stages. I followed all the steps as described in [esp32-le…
-
### CircuitPython version
```python
CP9.1.1
Boot_out.txt:
Adafruit CircuitPython 9.1.1 on 2024-07-22; Adafruit Feather RP2040 Prop-Maker with rp2040
Board ID:adafruit_feather_rp2040_prop_maker
UI…
-
Mongoose OS only currently supports running ESP32 on single core, basically leaving the second core completely unused.
Yes i've seen the thread at:
https://forum.mongoose-os.com/index.php?p=/discu…
-
### Describe the bug
Not really sure if this is the bugbase. Please advise if I need to file this issue somewhere else.
I noticed that on my 32 bit Raspberry Pi OS Lite after doing "sudo apt-get upd…