-
After searching the whole network, I finally found you. You are the only author of the script for making porkbun ddns. But I cannot run the script update dns record on the openwrt router. do not know …
-
Hi,
I am using a TP-link AC1300 dongle and I've managed to install the driver on kali linux (5.10.0-kali7-amd64). I've noticed that it does not see my 5GHz access point at all. It does see the 2.4G…
-
**Describe the bug**
Interface misses the selection bar - not sure if this is the right term, have a look at the screenshot. Might need optimization on openwrt 21.02.2.
**To Reproduce**
Steps to …
dmuiX updated
2 years ago
-
### Describe the bug
**Describe the bug**
Radios do come up after installing OpenWRT on the MX4200v1 and configuring the necessary.
However the 5Ghz (phy0-ap0) will not send any data as …
-
I find this project very interesting, I have an RTL-SDR stick plugged into an OpenWRT router running a RTL_TCP server for the network.
Obviously this code is tailored to accessing a local RTL dongle …
-
```
What steps will reproduce the problem?
1. Change root/access password for router, change/create WIFI password
2. Reboot router or cycle power
3. The passwords were not saved
What is the expected …
-
hi,
i own many openwrt platform and begin to run rtl433 on them.
on
Model
TP-LINK Archer C7 v5
Architecture
Qualcomm Atheros QCA956X ver 1 rev 0
Firmware Version
OpenWrt 19.07.3 r11063-85e…
-
### 详细叙述
Router (10.0.0.1) -> Ubuntu (10.0.0.122, 在 54321 监听 HTTP)
Router 上设置端口转发从 wan 到 `10.0.0.122:54321` 之后，
- 外网设备可以通过 `公网IP:54321` 访问到 Ubuntu 上的 HTTP 服务
- Ubuntu 自己可以通过 `公网IP:54321` 访问到自己上的…
-
```
Hi,
What steps will reproduce the problem?
1. Upgrading firmware with
openwrt-ar71xx-generic-tl-mr3040-v2-squashfs-sysupgrade.bin
when I now think I should have used
openwrt-ar71xx-generic-tl-mr…
-
```
Hi,
What steps will reproduce the problem?
1. Upgrading firmware with
openwrt-ar71xx-generic-tl-mr3040-v2-squashfs-sysupgrade.bin
when I now think I should have used
openwrt-ar71xx-generic-tl-mr…