-
I am using ev3-ev3dev-jessie-2015-05-20 and run apt-get update + apt-get upgrade today. After the reboot it boots, but gets stuck at some point before launching brickman. Neither wifi nor usb-ethernet…
-
When i executed:
pi@raspberrypi ~ $ sudo ifconfig wlan0 up
SIOCSIFFLAGS: Operation not permitted
pi@raspberrypi ~ $ dmesg
[ 1782.730609] Request firmware failed with error 0xfffffffe
pi@raspberrypi …
-
I'm working with manual adafruit for access point with chipset 8188eu
https://learn.adafruit.com/setting-up-a-raspberry-pi-as-a-wifi-access-point/install-software
Trying to adapt to FruityWifi
Host…
-
I plugged the rtl8188eu into my laptop and make it work with preinstalled Intel 7260ac. If I turn off one adapter, the another will also be turned off. And if I disable the physical swtich of Intel 72…
-
Hi, when I try to compile the drivers for the rtl8188eu i got this log
make ARCH=arm CROSS_COMPILE= -C /lib/modules/3.4.79-sun4i/build M=/home/cubie/De …
-
There are a lot of kernel messages while stressing out mt7601u device.
My setup has 2 usb wifi dongles:
1. RTL8188eu compatible, acting as an AP with hostapd
2. MT7601u compatible connected to externa…
-
Serial number of your pi (00000000f4bbef94)
Size of Raspberry Pi (512)
Type of SD card (SDHC class 10 8Gb)
Internet connection type (Wifi)
Version of RasPlex (0.4.1)
How did you install rasplex? (gui …
-
Installer : http://osmc.tv/download/linux/
Version : OSMC ALPHA2
Hardware : Raspberry Pi B+ with rtl8192cu
Followed the prompts and entered the SSID and key
On boot there is no IP address (would hel…
ghost updated
9 years ago
-
Hi,
I'm trying to get node.js bindings working on ev3dev. I found out that examples/test-motor-sensor.js does not work. See below. Has the folder been renamed or the interface to motor sensors change…
-
Thank @Kaijun for his wonderful contribution to our V5 573 community!
I have successfully installed 10.9.5 on my i5-GT750M laptop. Everything looks OK...except one thing
The battery icon on the menu b…