-
Live data appears faulty after running for an extended period of time.
1. Changing the display time span range does not operate as expected (details are not yet known)
2. The actual time does appear t…
-
Add this calculator to the Update Firmware dialog right under the Get Command.
It computes the bit offset that the user has to input to set the initial zero direction vane direction.
-
Please try the firmware update dialog. It is not working to update anemometers. Please see the latest firmware in the email. Atmo 1.0 updates just fine with the newest firmware.
-
ERROR: When 2 anemometers are connected, and **Anemometer A is selected**, live data plots show anemometer B data.
ERROR: When 2 anemometers are connected, and **Anemometer B is selected**, live dat…
-
When I exported the Raw Data and 10min average data for analysis in Excel:
1. The 10min Averages as calculated in Excel did not match the Raw Exported 1sec Anemometer data.
2. Temperature Standard D…
-
When GET button is pressed, anemometer enters Boot loader mode via **0x74** (send enter Boot Mode to anemometer from PC) command.
Next the **0x71** (send Correction Factors to PC) command is execut…
-
Let the slider min value go to zero, but in the weibul calculation, all zero wind speeds should be treated as wind speed 0.25m/s Also the histogram should show how often zero wind speed occurs by h…
-
1. Please rename the Download Data to "Download Logger Data" the button should preform a quick download based on previous settings from the last date of imported data in the database.
2. Allow cha…
-
Conver .CSV file into SD Card .DAT hexadecimal raw data file format.
SD Card Data File Format:
Each File ATTEMPTS to ends at time 24:59:59 at which point a new file is created for the next day. (each…