-
I have trouble getting the integration test to work. I have two radios hooked up to the SPI0 bus on a Raspberry Pi and I can use both of them (but not at the same time) with the sx127x-util tool witho…
-
Apologies in advance if this is an upstream bug in openocd or ecppack.
I have an SVF file which is just a blinky for an ECP5 (LFE5U-12F) FPGA built with ecppack. If I use the `jtag-svf` applet, it …
-
Hi
I'm trying to use Fastled with a Teensy4 but the resulting colors on the connected ledstrip are wrong
It seem like the color output is shifted or Xored is some way
Here a sample code for …
-
## 1.问题
内核报错 igb 0000:01:00.0 eth0: Reset adapter
## 2. 详细叙述
### (1) 具体问题
只要在82576网卡的eth0网口上连接网线到电脑或者路由器，就会不断重置eth0网口，网卡上的灯也亮一会就灭，灭了一会又亮，导致无法访问互联网
### (2) 路由器型号和固件版本
HP T620 PLUS | Ope…
-
Feel free to use these pictures in the official documentation, I release them into the public domain. The only image I don't own is the R-Pi pinout diagram, that was sourced from Adafruit.
![IMG_41…
-
### Describe the bug
The moment I go to read the files created by BlackBox into my DarwinFPV CineApe25 I find only partial data and holes. I have tried various SD Cards but this does not seem to solv…
-
### Describe the bug
Altitude sent by the FC to the transmitter over CRSF is off the scale or doesn't work at all. Before arming the absolute altitude is shown. Then just after arming it's resetted…
-
Please like this ticket, if you are using anytree.
Feel free to share infos about your project.
-
Hello,
how far off are you from https://sourceforge.net/projects/ethernut/ HEAD? Any intention to offer it?
Please note, I will be mostly offline until Sep.1
-
### Describe the Bug
Setting `WS2812_BYTE_ORDER` under specific conditions will cancel itself out.
What I mean by this, is when setting the directive `WS2812_BYTE_ORDER` for the WS2812 driver, the c…