-
Would it be possible for an alternate "Main Body" file to be published for the Rapido UHF? The official Stealthburner mod is located here: [https://mods.vorondesign.com/detail/XN1NolgVYYBu1HNnxqC7Fg]…
-
In https://github.com/bigtreetech/BIQU-BX/commit/475c6b5c8923bfd69c9bd2a1bae81f4b93301507, the config was changed to use a single Z driver & PT100/PT1000 with MAX31865.
Examples:
https://github…
-
Hi, I'm unable to connect to the board and update the bootloader via STM32 programmer, I get the error "no debug probe detected". I'm trying to run Reprap on the octopus and the board chip is STM32F44…
-
Cannot find files mentioned in skr pico uart setup, It seems the boot folder is empty? are these files on a different partion?
these are the instructions I cannot follow from the skr pico setup doc…
-
My old domain is `btt.service.gongt.me`, I do not use this any more. So I created a TXT record for it.
But after a month, it still here. Maybe a bug, or I did something wrong?
```
# dig -tTXT b…
GongT updated
2 weeks ago
-
Hello. First of all congratulations for your great work with this printer. I have obtained very good results, and it is a luxury to have information like this at our disposal for those of us who do no…
-
I have installed the Eddy USB on my Sovol SV06, positioning it exactly where the inductive probe was previously located. Consequently, I copied over the X and Y offsets, Mesh_min and Mesh_max, and Hom…
-
Add-wr commands. should properly check if the wr exists in the db already
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
Recently my motherboard is fried (BTT SKR 2.0 F429) while printing after receiving the …
-
BTT-Writer 1.0.2-3 (Also 1.0.2-2, I believe)
Tested on Windows and Linux.
Okay, not sure exactly how to report this. The En_ULB for Revelation marks the chunk for Revelation 13:11 as 12. The resul…