-
Hey,
If I add fe80::2 to RIOT ethernet (ethos) using "ifconfig add fe80::2", then add fe80::1 to the ncache for that interface ("ncache add fe80::1"), ipv6 outputs this:
```
main(): This is RIOT! …
-
When testing #4144 with a border router setup, I set up the interfaces as follows:
```
ifconfig
2015-12-23 15:00:24,042 - INFO # Iface 5 HWaddr: 65:b2 Channel: 26 Page: 0 NID: 0x23 TX-Power: 0…
-
```
What steps will reproduce the problem?
- try to send packet with length 15 bytes and more of payload without
RF230_SLOW_SPI defined or slightly more bytes with RF230_SLOW_SPI defined
What is th…
-
I think this is why i can't see sensors. But I don't know what to do with it.
I am using the platform cc1120
-
Hej,
After this step below I receive the error:
user@instant-contiki:/usr/lib/6lbr/bin$ /usr/lib/6lbr/bin/nvm_tool --update --channel 25
/etc/6lbr/nvm.dat
Channel : 25
PAN ID : abcd
WSN network p…
-
```
It seems that the Dummy Extended Address, named LocalIeeeEui64C, has
been included for micaz, but not for intelmote2.
As the /opt/tinyos-2.x/tos/chips/cc2420/control/CC2420ControlC.nc
file wires …
-
```
What steps will reproduce the problem?
- try to send packet with length 15 bytes and more of payload without
RF230_SLOW_SPI defined or slightly more bytes with RF230_SLOW_SPI defined
What is th…
-
Am I right if I'd say that this serial protocol is not SLIP at all? SLIP only supports sending IPv4 packets.
This is just a custom protocol whose framing resembles the SLIP one. Isn't this name mislea…
-
Hello everyone,
I am now in a starting phase of a 6lowpan project.
I did exactly as the instruction from
http://processors.wiki.ti.com/index.php/Cc26xx_sw_examples
The compile was done and I can …
-
what is the format of nvm.conf?
how to create it?
---
Wednesday 13 April 12:46:31 AEST 2016 : Starting 6LBR
/usr/lib/6lbr/bin/cetic_6lbr_router -c /etc/6lbr/nvm.dat -o /etc/6lbr/nvm.conf -s /dev/tty…