-
Hey g4klx,
I tried reimplementing your script for updating Nextion displays over the serial cables as part of a larger project and I'm getting stuck on the "Waiting for ACK..."
I then downloaded y…
-
I noticed the following effect, when playing around with a DVMEGA hotspot on arduino:
```
M: 2016-03-17 13:46:25.848 Opening the MMDVM
I: 2016-03-17 13:46:27.893 MMDVM protocol version: 1, descriptio…
DL2MF updated
8 years ago
-
Hi, gets "Cannot open device - /dev/ttyAMA0" when trying to run MMDVMHost in daemon mode. Have done the commands from README.Daemon.
73 de LB5JE
lb5je updated
8 years ago
-
Display 20x4, the fourth line (mmdvm idle) is not cleared in listen mode
-
I don't know really that it is an issue in the Dashboard.
Since the last update of MMDVMHost (compiled yesterday) the Dashboard doesn't Show the actually connected Reflector. It only shows TG9/Reflect…
-
Please advise? Attempt's to use this with port 13920, 13921, 42000 all failed with or without dv_serial running & MMDVM on and off.
Thankyou
-
Hi Team,
Since the last two updates, I have been experiencing more recurrent the resetting.Today I had this resetting, at least 5 times, on two occasions being totally in a loop.
I did a re-flash fi…
YV5OF updated
8 years ago
-
The RX side of the repeater doesn't work .... the TX works well !!!
M: 2016-11-01 18:51:22.749 MMDVMHost-20161021 is running
M: 2016-11-01 18:51:32.901 DMR, Logged into the master successfully
…
-
I suggest that the brightness of the Nextion displays should be dimmed to e.g. 50% when in idle mode. This allows for a better recognition if the MMDVM is actually transmittig/receiving or not. And it…
-
Hi
why in Fusion the BER is very high ?
In DN mode the BER is around 15/20% , but it is lower using VM mode , I noticed also that after pushing the PTT I ear some seconds of tail with my last over .…