-
_From [watusim...@bitfighter.org](https://code.google.com/u/105427273526970468779/) on September 11, 2011 01:34:24_
When shooting, figure out where each bullet should be created to give a more even a…
-
Can Intel ME bridge after market network cards? And just how much safer are you using an after market NIC on an ME enabled device?
According to Intel staff: Are separate Intel gigabit NIC cards a …
-
Your csniffpiper was very helpful to me. I've figured out a few changes to make ccsniffpiper work with the CC2540 and generate BLE traces that Wireshark can handle. What's the best way to make this av…
-
We tried porting bluez 5.45 to our device (Linux kernel 3.10), we tried install LightBlue on both Android/iOS, we found:
If connect with BLE profile, it will be failed. (Refer to attachment)
S…
-
I am developing pairing feature in BlueZ application and encounter a problem which is related to [this commit](https://github.com/torvalds/linux/commit/7aca0ac4792e6cb0f35ef97bfcb39b1663a92fb7#diff-60…
-
This should involve two things:
* [ ] Make connection errors more obvious (see #187 for motivation)
* [ ] Reconnect when disconnected (will happen if, for example, ESP reboots)
sidoh updated
3 years ago
-
Installing the new kismet 2021, on iMac OSX with ubertooth, for Bluetooth scanning. seems to be a problem because the respective plug-in could not be built … and the respective Kismet data source reco…
-
https://wiki.wireshark.org/CaptureSetup/Pipes
Maybe this mechanism could make this project to work in real time and on MS Windows. Anyway I saw this work for nRF sniffer.
https://www.nordicsemi.co…
-
```
- What steps will reproduce the problem?
1. Configure and enable a joystick to output "ardupilot mega" data.
2. Select the "serial data" tab. Optionally, connect the GCS to a virtual
serial port …
-
```
- What steps will reproduce the problem?
1. Configure and enable a joystick to output "ardupilot mega" data.
2. Select the "serial data" tab. Optionally, connect the GCS to a virtual
serial port …