-
-
- [ ] Requirements definition
- [x] Schematic completed
- [x] PCB routed
- [ ] Schematic/PCB reviewed
- [x] BOM generated
- [x] Gerbers generated
- [x] MCAD generated
-
Make sure these boxes are checked before submitting your issue - Thank you!
- Sonoff 4CH PRO
- Firmware 5.12.0
some channels are turning on and off without user interaction.
I have several So…
-
(copied from https://github.com/zha-ng/zigpy-znp/issues/10)
Thanks for the awesome board! I'm seeing an average LQI improvement of 30% compared to the bulkier LAUNCHXL-CC26X2R1.
Here are some su…
-
Dear digit-design team,
I want to fabricate the digit sensor. In the `hardware` directory, there are two options: `digit` and `digit-flex`. Are these two different version of the sensor or are thes…
b4be1 updated
4 years ago
-
Hello,
Great project. Firstly thanks for that.
My issue where I need support is that, I found a petling which has 33 mm inner diameter and around 120 mm length.
When I see the stl files of 3D …
-
- [x] Requirements definition
- [x] Schematic completed
- [ ] PCB routed
- [ ] Schematic/PCB reviewed
- [x] BOM generated
- [x] Gerbers generated
- [x] MCAD generated
-
Hello!
Thanks for the release of [all the files](https://github.com/facebookresearch/digit-design/blob/master/releases/DIGIT-fab-release-2020-1.zip) needed to contact a PCB manufacturer for the boar…
-
- [x] Requirements definition
- [x] Schematic completed
- [ ] PCB routed
- [ ] Schematic/PCB reviewed
- [ ] BOM generated
- [ ] Gerbers generated
- [ ] MCAD generated
-
Probably a long shot, but I'm looking into making some modifications to the Totumduino board and I was wondering why there is an external 5V DC/DC soldered on the 5V PSU of the Raspberry Pi connector.…