-
In its current state, the `usb` module is incapable of connecting with the U2D2 before another program (for example python's `serial` library) had already established communication. This greatly reduc…
-
Windows is currently not supported because of the following (non-exhaustive) reasons:
1. The listing of all files in a directory is OS specific
2. The serial communication with the Arduino is OS speci…
-
Hi I am using 2 Arduino MKRWAN 1310 boards with 2 GSM Antennas (I guess 2dBi) and the transmission range doesn't exceed 60m using SF12 and 30m using SF7 in an open football court (direct LOS), Althoug…
-
The build instructions probably ought to call special attention to putting the Atlas Scientific sensor circuit modules in I2C mode (see [EZO pH Circuit datasheet](https://www.atlas-scientific.com/_fil…
ghost updated
5 years ago
-
If I call multiple communication operations between ncclGroupStart/End, will these operations be processed in parallel and using more SM? Does this kind of aggregation has upper limit? Or nccl just me…
-
#-- coding: utf-8 --/
import sys
import serial
import time
#Arduino communication port setting
#ser = serial.Serial(
# port='COM9',
# baudrate=9600)
#G-Code File Open
f = open("E:\\t…
-
```
I'm trying to use the nfc driver with this board
(http://www.ebay.com/itm/PN532-NFC-RFID-Controller-Breakout-Board-For-Arduino-UN
O-Mega-2560-A124-/261124109868) without luck.
I downloaded the l…
-
Hello,
I'm working on a project of MIDI (or equivalent) modular controller based on Arduino Uno boards.
1) Peripheral Arduino boards have to send their sensors values (buttons, potentiometers, fader…
-
```
Use STM32F1xx , with ST virtual com port for USB (serial port) full speed
communication.
the software do not recognize the port.
```
Original issue reported on code.google.com by `michanis...@g…
-
```
Use STM32F1xx , with ST virtual com port for USB (serial port) full speed
communication.
the software do not recognize the port.
```
Original issue reported on code.google.com by `michanis...@g…