-
Dear developers,
Since I used the DSMR or Slimme meter integration USB-cable (https://www.sossolutions.nl/slimme-meter-kabel) on the Raspberry Pi4B+ the history page of home assistant takes forever…
ghost updated
4 years ago
-
**Wat gebruik je?**
* DSMR-reader versie: v3.8
* Hardware: RaspberryPi 3B+
* Native of Docker *: Native
* DSMR-protocol slimme meter *(v4 of v5)*: v5
Sinds de laatste versie werkt het in en ui…
-
Hi,
I use a D1 mini clone to run your DSMRloggerAPI. All runs fine for 1 hour but then I get `Bailot` messages.
Did I use the wrong setting to flash the D1? Or is there something else I could do…
-
**Wat gebruik je?**
* DSMR-reader versie: 3.7
* Hardware: RaspberryPi 3b
* Native of Docker: Docker
* DSMR-protocol slimme meter: v5
Screenshot ter verduidelijking:
.
In HA core version 0.105 it worked correctly.
During the 'piek uren' sensor.power_tariff…
-
I have connected a USB serial converter to my Edge device and loaded the module. (I know for sure that this is the port, because with python I get data on that port). Beside that I get this error:
…