-
In NixOS 21.05, the ``hardware.deviceTree.base`` option can no longer be used. After trying to do some research, I figured out that the lines that I was using successfully:
```
hardware.deviceTre…
-
Hi Dustin,
love the design and the idea.
I bought all the products you recommended, pcb from pcbway ILI9488 screen and ESP32-WROOM-32D and ive followed your youtube tutorial https://www.youtube.…
-
Using a QT PY ESP32-S2, an SSD1322 OLED display and CircuitPython 8. Currently I just have a simple clock displayed although the program has other features. I'm using the built-in RTC along with NTP…
-
Hello,
Thank you for your work.
Everything works with an regular ESP32.
On the other hand, I'm tearing my hair out with an ESP32S3, whatever the model: I have two of them and they both refuse t…
-
## Do not report new issues related to this message, instead please comment on this issue with the logs that you see and the config for that component.
### The problem
```
[00:00:00][W][compone…
-
**Carefully written Issues are more likely to be given priority.**
**丁寧に記述された報告は優先して対応される可能性が高くなります。**
## Environment ( 実行環境 )
- MCU or Board name: ESP32-S3-WROOM-1-N16R8
- Panel Driver IC: …
-
### 详细叙述
X86 J4125四口主机，看到最近加入了r8157 5G USB有线网卡支持，迫不及待买来测试。
可以正常识别，显示为第五个网口eth4，并加入LAN。刚插入网线的前几秒可以用，但10秒左右就会…
-
Hello,
I try to clone my SD card to a SSD disk (Argon one case with the SSD adapter). But when I run rpi-clone I got the bellow error message. When I try to boot of the SSD only Pi will not come up…
-
`apt install rpicam-apps` = The following packages will be REMOVED: libcamera0
I use: `gst-launch-1.0 libcamerasrc...` which breaks because:
```
gst-inspect-1.0 libcamerasrc
Filename …
-
**Screen turn black when vc4 is enabled**
When I compile a core-image-base for MACHINE=_raspberrypi4-64_ on **kirkstone** branch, with poky also on **kirkstone** branch, the device boot and at the …