-
Hi,
I have been working with your LoRaDuplex sketch and I ran into some issues.
I was able to get it running with a Leonardo with a Dragino LoRa radio, I was also able to get it running with a M0 …
-
Testing Setup: one Transmitter @ 433.5Mhz, config Radio_B to 433.2Mhz and two channel with IF 0Khz and +3Khz.
Problem: the transmitter is transmitting package one per second (confirm by other SX127…
-
The example program given in I-CUBE-LRWAN 1.1.0 is for STM32L053,but i have STM32L082 and sx1276.I am using India Lorawan public network which is under 868MHz.I changed the frequencies to INDIA lora f…
-
Dear Pham!
Thank you for all your efforts to share your experiences with LoRa technology.
Using the provided documentation and software I managed to create a working setup on 868MHz with a RPI3+[c…
-
Hi, how to receive and send at the same time?
I put the example in the reception and send written together, but still can not get the results I want.
I need your help.
Thank you!
-
i used lora sx1278 thinker ra-2 to make a system. having lora master and 2 lora slaves.
but i can't receive feedback message from slave when i sent message from master. i think it has some conflict …
-
Hi:
I'm debugging the confirmed msg, when i USE_BAND_470 , seems like class A node can't recieve ACK, it re-sent packet for 8 times, but from base station web page ack was sent. when i USE_…
-
Hello Sandeep,
I am using ATSMAD21G18A with doorji lora sx1278. I have tried using your program that you uploaded in your github repository. I am getting an error "starting lora failed error". …
-
hi,
Thanks for your single channel lorawan gateway, especially the ideal of CAD with scanning SF. It cause my arouse my interest. but I find problems as follow:
The packet loss rate is pretty high…
-
Hello,
Thanks for this excellent library. This is surely something all LoRa user's will start using. I would like to know if **your library has support for these modules** as I am looking at purchas…