-
I'll preface this by saying I barely know what I'm doing with this stuff, but I get by. I got Wyzesense up and running just fine yesterday, sensors put into automations in node red and working normall…
-
## The problem
After update to 0.111.1 my nuki lock do not update status.
## Environment
host_os | HassOS 4.10
os_version | 4.19.126-v7
python_version | 3.7.7
supervisor | 227
version | 0.111…
-
**Home Assistant release with the issue:**
109.4
**Operating environment (HassOS/Generic):**
Proxmox > Debian VM > Docker > HA supervised
**Description of problem:**
Cannot access superv…
-
HassOS 2.11
HA: 0.104.3
Shelly: 0.1.6
Device: Shelly 1, Shelly 1PM, Shelly 2.5
All three devices have same behaviour, which is the following.
I start from off state.
I turn it on, the light …
-
I'm running HassOS 2.12 and I have a Tadobridge (V50.6) and Tado Thermostats (V54.12).
They work for a while and then when i want to change the temperature i get this error in the logs.
```
2019-…
-
Home Assistant release with the issue:
0.104.2
Last working Home Assistant release (if known):
0.103.6
Operating environment (Hass.io/Docker/Windows/etc.):
Raspberry Pi 3B+
Docker
Integr…
-
Hello,
i bought 2 zigbee osram mini switch, i made a pull request to make it working on zigbee2mqtt, but now i use conbee :)
i have 1 blue and 1 white
i like these remotes for my roller shutter
ht…
-
[lutron integration report ra2 select.txt](https://github.com/FlyingDiver/Indigo-radiora2/files/3823615/lutron.integration.report.ra2.select.txt)
-
I did a seemingly minor upgrade today of Homebridge and after it had completed and rebooted, the node-red-contrib-homebridge-automation started crashing Node Red in its entirety. I had previously had …
-
All devices are not reachable. In Phoscon all devices are greyed out. Can not control any of them.
Deconz is located on a RP 3+ with a Raspbee Head.