-
kernel problem?
-
Hello!
I have rk3328 system, I built all related sources from rockchip-linux repos, rockchip kernel.
I can decode video via gst-launch-1.0 util using kmssink (my system is without X/Wayland).
Bu…
-
44.1khz audio do not work after playing 48khz audio due to use of fractional divider PLL.
**Playing 48khz audio**
`clk_i2s0` is using integer divider and audio works as it should
```
LibreELEC:~…
-
1.if i plug to the 1080p AVR -> 4KTV monitor -> (get only a 800x600 resolution)
2.if i plug to the 1080p AVR -> 1080p Monitor -> ( have a black screen, no signal )
-
I have rock64 4G. I tested 0.6.31 and 0.6.30 with memtester.
Both have memory failure. And software have random crash.
Python3 is not working after the latest update.
However, I have no such probl…
-
Hello.
There is totally broken VOP for rk3288 platforms (TinkerBoard, ...). It usually boots only to 800x600 resolution that pass both errors (see also http://tinkerboarding.co.uk/forum/showthread.…
-
Recent changes to pl330 in `release-4.4` causes media playback issues and page faults for iommu/vop.
Reverting Rockchip changes and backporting upstream pl330 from mainline linux seems to solve thi…
-
Currently with stock device tree it seems that we have the following clocks :
- CPU will run 1.3 Ghz
- GPU will run 500 Mhz
- VPU not sure 100% but most likely 300 Mhz
As far as i know Cortex…
-
Quite often when rebooting with `reboot`, it seems that the device gets locked.
It seems it won't happen if we boot in console mode only.
The only way to restart the device then is to pull the plu…
-
Kernel as support for the externel GMACPHY but not internal MACPHY