-
```
D3200 is detected but info in green on screen is not updated unless you select
disconnect usb and reconnect. Also. No live view. Changing settings works
great
```
Original issue reported o…
-
```
D3200 is detected but info in green on screen is not updated unless you select
disconnect usb and reconnect. Also. No live view. Changing settings works
great
```
Original issue reported o…
-
```
D3200 is detected but info in green on screen is not updated unless you select
disconnect usb and reconnect. Also. No live view. Changing settings works
great
```
Original issue reported o…
-
```
D3200 is detected but info in green on screen is not updated unless you select
disconnect usb and reconnect. Also. No live view. Changing settings works
great
```
Original issue reported o…
-
```
D3200 is detected but info in green on screen is not updated unless you select
disconnect usb and reconnect. Also. No live view. Changing settings works
great
```
Original issue reported o…
-
### DESCRIPTION
After some years of working without problems, suddenly MQTT communication fails:
![image](https://github.com/user-attachments/assets/1b0554bb-2603-4e00-afb7-f94dc516b6d4)
…
-
### Answers checklist.
- [X] I have read the component documentation [ESP-IDF Components](https://components.espressif.com) and the issue is not addressed there.
- [X] I am using target and esp-id…
-
Cut the CMSIS-DAP/debug console communication in the middle and put WiFi in between.
Pico at the target would be the AP, Pico at the host would be the STA. That means that the two Picos would crea…
-
hello i would like to know how to change control change potentiom to note on, software that work only recognizes midi Note On both button and fader. how do I send these notes to the faders?
-
```
1. I upload the Simple Modbus slave example to arduino.
2. Connect arduino uno to computer via max485 and USB to rs485 converter
3. Try to read registers with Modbus poll and Mtester
I receive me…