-
When setting up an Arduino Due with `upload_protocol = stlink`, the upload by-default **fails** because the upload is trying to use the `.bin` file without giving the correct start address of flash `0…
-
Want to simplify use of this library by including classes that encapsulate configuration and processing of MIDI events from different frameworks.
Thinking they will share two common methods, but wi…
-
Hi,
I'm currently using a fork of this project for one of my machines. I would like to add onto it using a unit test based workflow.
I was very interested when I found [grbl-sim](https://github.…
rirze updated
4 years ago
-
Using real numbers this is the actual calculation desired, where m=[0.0, 1.0] is the interpolation factor.
result = round(a + (b - a) * m) (1)
But your blend functio…
-
Hi,
I encountered a small issue with trying to use the stm32g030 series (cortex M0+ mainstream line) which seem to not be present in platformio? They are supported by cube and stm32duino as far as …
-
Hi
I try to compile the OTAA_OLED sample code to test my Lora 32 module but when I compile I get these:
```
Compiling sketch...
/home/vincen/.arduino15/packages/esp32/tools/xtensa-esp32-elf-gc…
-
### The problem
Since around 2024.04 two configured UARTs on a S2 Board will fail to boot.
It was working OK until 2024.03.
It is working with Arduino IDE
If either of the two UARTs is removed…
-
Hey @Novgorod,
I'm curious if this (or maybe another project your aware of) could help me solve me problem.
I'm looking for a way to convert a LANC controller (sending the signal to Zoom / Focus…
-
### The problem
Ref https://github.com/esphome/issues/issues/3012
Whenever I open another UART or an I2C on top of an existing UART, the board will boot, connect to WIFI but not the HA API. The OTA …
-
### The problem
Tried on both Lolin C3 Mini and Espressif official C3-DevKitM-1. Once the SGP30 I2C sensor (tried two different ones) is attached, the device will randomly reboot about 8-10 times a…