-
Good day everybody.
My setup is: 2 devices, running Linux imx7dsabresd 4.1.15, directly connected through the eth1 interfaces of each device.
I am using the master branch of OpenAvnu, and I added …
-
### Discussed in https://github.com/harp-tech/protocol/discussions/16
Originally posted by **Poofjunior** September 21, 2023
Hi folks,
Is there any reason Harp stores firmware revision numb…
-
When I enable PTP hardware clock in config on RPi 5, I get `[07:43:11.7057039.737701416][statime][ERROR] Missing recv timestamp` (due to https://github.com/raspberrypi/linux/issues/5904). However I ca…
-
# 1 introduce
My program runs in **Raspberry Pi**, and the motor can rotate normally.
But if the same program is placed in **X86** or **Jetson**, the motor will not rotate and an error message wil…
-
### What version of Go are you using (`go version`)?
go1.19.5, linux/amd64
### Does this issue reproduce with the latest release?
yes
### What did you do?
I ran a _slowly_ leaking memory ap…
-
+ @aayasin TMA problem?
e.g. on SKL
./toplev --metrics -l3 -q ./workloads/GITGREP 2>&1 | grep Bottleneck
C0-T0 Info.Bottleneck Mispredictions Scaled_Slots …
-
运行命令：pip install -U qwen-cpp，请问这个是什么问题？
报错如下：
Collecting qwen-cpp
Using cached https://pypi.tuna.tsinghua.edu.cn/packages/a4/76/61e947717636072018ce25a5929af05b0e47538a564cc0c3298935b38a49/qwen-c…
-
Discussion started here: #350
-
### Summary
We are sometimes experiencing very long transmission delays when class C downlinks are scheduled without an absolute time. We should investigate why this happens, as generally the numbe…
-
### Description
In some cases, worth setting up anamorphic scaling, like when you're using an NTSC like CRT and setting up output models to deal with. The pixel clock for the horizontal resolution ne…