-
Hello,
I added new sensor demo application in my repository. You can test it with a dht11/22 sensor. Enjoy!
[https://github.com/swkim01/T-ZigBee/tree/main/examples/sensor_demo](https://github.com/…
-
HI sorry for asking noobie questions but I am having troubles with the DHT11 sensor and displaying the values in MagicMirror.
even if I use my own script in python which works properly outside the MM…
-
### Device
Wemos d1 Mini
### Version
1.15.0-dev
### Bug description
Hi,
I can't make dht11 work with the module. I always get timeout. It doesn't seem to be a hardware problem becaus…
-
When creating a Temperature Sensor device in SinricPro, I cannot create a routine with it in Alexa, as Alexa only allows me to "turn off and on" the sensor.
How can I resolve this?
(I'm using a …
-
picobricks.py doesn't define the DHT11 library. Version of picobricks.py included in the kit includes additional lines from 625 onwards to define DHT11.
[PicoBricks](https://github.com/Robotistan/P…
-
I used the manualZeroCalibration() and passed the previous calibration value i got from automatic calibration sketch after That sensor values constantly decreases and gets to 0.
-
This is an effort to port the TEENSY VERSION 3.1 MicroLoc to Teensy 4.0 but I'm failing miserably and I don't really know where I should be posting to.
I'm not troubleshooting per se and I could ju…
-
- Arduino board: Feather 32u4 LoRa
- Arduino IDE version (found in Arduino -> About Arduino menu): 1.8.13
I followed the adafruit tutorial on setting up a DHT11 (3 pin) with the feather. The li…
-
Hi, I use your library for ESP01 and works perfect if I supply to DHT11 5V. But ESP01 should work with 3.3V and I don't want to use a voltage level converter.
My issue is very similar to issue #98.…
-
After flashing a file compiled using Custom.h, the access point does not appear, the STA mode is turned on.
If you compile the normal version, the access point works
I used esp8266
INIT : Boo…