-
```
From https://groups.google.com/d/msg/openhab/ZOQkflvaFmk/3DTfbuh8D5kJ:
Today I cloned the openHAB repo and pushed the first draft of my CUL binding to
the clone. You can the complete repo consis…
-
I just get a new set of RPi3 (two of them) but i am having Issue with microSD and read-only file system after working on it or just do an reboot!
I installed Archlinuxarm as stated in archlinuxarm wi…
-
Problem occured with QLC+ 4.9.1, not git head
Description of the symptoms - longer story below:
- When QLC+ is started without a project, DMX input from Enttect DMX USB Pro works
- After a (large?) p…
-
Packaging for fedora I can't require libmad since it is not available of the standard repository (it is in the [rpmfusion](http://rpmfusion.org/) repository). Is libmad required for core features? QLC…
-
On every lauch of openHAB all KNX binding commands will be activated once, so all my lights will be switch on or off, dependent on current status. After the launch, everything works fine.
I work with…
-
In it's default configuration ola 0.9.1 from Debian jessie periodically takes over tty devices I use for debugging (I'm developing an RDM responder atm.). I had to disable all plugins except the one I…
-
```
From https://groups.google.com/d/msg/openhab/ZOQkflvaFmk/3DTfbuh8D5kJ:
Today I cloned the openHAB repo and pushed the first draft of my CUL binding to
the clone. You can the complete repo consis…
-
When using my USB-DMX interface to control the laser no stable output can be achieved. Laser "resets" rapidly and only displays correct image sometimes.
I had this problem on Windows before and found …
-
I have some problems with my program. It's a simple UDP server (connected to my router) listening on port 8888 for incoming data.
All runs great, I can send data to it and I get the reply back.
The pr…
-
```
From https://groups.google.com/d/msg/openhab/ZOQkflvaFmk/3DTfbuh8D5kJ:
Today I cloned the openHAB repo and pushed the first draft of my CUL binding to
the clone. You can the complete repo consis…