-
I am continually getting this error when running the micropython example code:
```
I (1560329) [PPPOS CLIENT]: AT COMMAND: [ATH..]
E (1563339) [PPPOS CLIENT]: AT: TIMEOUT
I (1563539) [PPPOS CLIENT…
-
Version: 0.6.2
Hardware: SIM800L
### Scenario, steps to reproduce
Connection, RX TX with level shifter.
Power the module by 5V Arduino Uno, through a diode, to Vcc SIM800L.
### Actual result
…
-
I am using Arduino Uno R3 board and Adafruit FONA 800 Shield - Voice/Data Cellular GSM for Arduino together.
I am sending commands to SIM800 and I am receiving responses.
To do this I am using a Sof…
-
I am using Arduino Uno R3 board and Adafruit FONA 800 Shield - Voice/Data Cellular GSM for Arduino together.
I am sending commands to SIM800 and I am receiving responses.
To do this I am using a Sof…
-
I USE SOFTWARE SERIAL TO COMMUNICATE WITH GSM MODEM PIN 2/3(RX/TX)
TinyGSM version:
Hardware:
I AM TRYING TO USE MQTT SERVICE OF THE LIBRARY
Expected result MQTT CONNECTION
Actual re…
-
I am working with the sim7000G and would like to install the project in a metal enclosure, along with the electrical components it's tied in with.
This will likely require me to move to a differe…
-
I am experiencing the same issue as in (horribly) described ticket #127
Using modem **SIM900**. Using baud rate 9600.
The problem is consistently reproducible,
I noticed that this happens on…
-
It's probably time to switch our examples to use Digi XBee3 LTE-M radio module in transparent mode. Presently, only the [`DRWI_LTE.ino`](https://github.com/EnviroDIY/ModularSensors/blob/master/example…
-
Hello! Please help!
Im using SIM800 GSM via TinyGSMclient library, but no examples of code how use NTPClient in my case. Im search a lot but not found how tu use udp: Reference to an UDP object with …
-
I am using v0.3.5 and code froze after +- 12 hours;
......
[06:25:54.181] Modem inittialized
[06:25:54.181] AT+CSQ
[06:30:24.567]
[06:30:24.590] +CSQ: 15,0
[06:30:24.631]
[06:30:24.631] OK
…