-
Slouží ke zjištění polohy balonu skrze komunikaci s pozemními radiovými stanicemi.
- [x] Zjistit kolik stojí LoRa modemy s Arduinem (@povik)
- [x] Koupit 2 tyto sestavy (@Alsa-Tucnak ), pokud bu…
-
Hello,
I updated successfully to the latest version 0.4.5 (https://github.com/cjhdev/lora_device_lib/commit/597630c030b035fc6f82aaf9916cefd466268693).
I see a different behaviour, compared to pre…
-
We can change only LoRa Band in the script, but how about the next parameters:
#define Power 20 // Set Power Tx Power
#define SF 12 // Set Spreading Factor
#define BW 125000 // Set Bandwidth
#defi…
-
@GrumpyOldPizza thank you so much for making this repo. I have been using the new [Arduino Portenta](https://store.arduino.cc/usa/portenta-h7) with [LoRa Vision Shield](https://store.arduino.cc/usa/po…
-
The RX LNA on the SX1262 is disabled.
Enable this.
lora.setRxGain(true)
-
Hello,
I have an EBYTE module [(Product page)](http://www.ebyte.com/en/product-view-news.aspx?id=453) that has a max output power of ~31dBm. Despite modifying the range in SX1262::setOutputPower to m…
-
Is there a certain button combination that puts the Evil Crow in programming mode? Every time I try to flash RFQuack, it fails.
-
Hi There,
For my project I required a TRNG (true random number generator). (32bit)
I found out that the SX1262 has a specific register for it! (already specified in "sx1262.h"):
`
#define SX126X…
-
**Issue:** When using the SX126x receive interrupt example, the received data is incorrect and repeats for 3 to 20 seconds. Below is a snippit of the transmitted and received data. Is there something …
-
Hello There,
Recently I am trying to implement with sx1262 with US915 with the frequency of 914300000 with ABP mode at that time on the server I facing a tx_freq issue in the event log how can I solv…