-
Found a problem with waking up the SX1261 chip.
In the sx1261mbxbas-board.c file of the void SX126xWakeup (void) function, you must add a delay of at least 100 μs after the ChipSelect signal.
`
voi…
-
Hi,
is it possible to decode RTTY directly? I have a module with sx1276, esp32 and oled display. I would like to receive and decode itty directly on board and show messages on display. Can you explai…
-
Hey, I'm having trouble setting up the SPI transaction in working properly. My current setup is using a STM32F103RB with the SX1262MB2xA5 board as an attachment. I modified the example transmit and re…
-
I was trying to generate a pseudo packet file to test [LORA1268F30](https://www.nicerf.com/product_193_312.html) module based on SX1268 to use with gr-satellite. However was facing some issue with pac…
-
Hi,
I've been trying for a while now to run an AT Slave application using the SX1262, it works properly with the SX127x but with the SX1262 I can only transmit correctly.
Here is my hardware set…
-
Hy @beegee-tokyo, i really enjoy your discussions in radiolib issues about ebyte module.
currently, i try to develop e22-900m30s ebyte module, as far as i know, your library and radiolib can apply …
-
Looks like this is nice project.
I Pretend to use ESP32 with RFM95
But I got lot of errors while compiling for CFG_sx1272_radio/CFG_sx1276_radio
src\main.cpp:459:10: error: 'pins' was not dec…
-
Hello,
i am trying to set up an OTAA activation with LoraWAN on The-Things-Network. but with no success.
I managed to have a successfull running configuration with ABP activation. Therefore hardware…
-
Hello,
The last time I compiled your code in the Arduino library.
https://github.com/ricaun/arduino-BasicMAC
The sx127x works ok but the sx126x I have some problem with the Dio3. My board does …
-
Hi guys,
just wanted to ask if you guys will also integrate the new LoRa chip LLCC68. If yes, when are you planning to do so?
Cheers & thanks!