-
Hi!
Thank you for maintaining this library; it is helping me a lot with programming an arduino uno R4 wifi with a 20x4 LCD.
So far, I've been using pins A4 and A5 for the data and clock pins, bu…
-
### Description of defect
Working with ATECC I2C device for LoRa, in `Debug` or `Develop` mode works like a charm, as soon as I build in `Release` mode, device is not seen anymore and can't tal…
-
I began to run some of the old unit tests, and found that the scanner test was failing because `&` was being lexed as `TAmpersand` rather than `TOp "&"`.
In #14, I hard-coded the scanner test to ex…
j-hui updated
2 years ago
-
On main, running `clang-scan-deps -format=p1689 -- clang++ -std=c++20 test.cc` on this program
```c++
// File: test.cc
#if 123'124
#endif
```
gives:
```
Error while scanning dependencies for t…
-
Can't get this library working on Arduino Due, its fine on Arduino Uno so there must be something different for Due. Using pin 20 and 21 with level shifter I’m able to find DS1844 with I2C scanner so …
-
Trying to build/run example code (Simple_MPU6050_Example or Simple_MPU6050_Basic_Example and probably the others) for PI PICO-W code compiles and downloads to target, but I2C is not working.
Serial…
-
Bill of Materials for Physical Device:
- 2 x Raspberry Pi 3
- Due to the way the RFID scanner and relay(s) are hooked up, it would probably be more cost effective to hold off on *two* RPi3s for …
-
Hi,
I'm trying to get an i2c sensor (the BMP180 from Sparkfun) up and running for the past few days with the arduino environment. However, without any luck. On an arduino I get it up and running in …
-
Hi @alf45tar
I've rebuilt my Pedalino-8 with the Lilygo T-Display S3, this time I've bought a M-Audio expression pedal and I've added a TRS jack to connect it to the esp board.
Unfortunately and wit…
-
I have a SpaceCat Launchpad that uses a pro micro, and I'm trying to get it to work with Keyplus. For some reason, the bottom right key isn't working. When I press the key, my computer sees it as pres…