-
As discussed in [#5469](https://github.com/zephyrproject-rtos/zephyr/pull/5469#issuecomment-373422463), current PWM API prevents dynamic prescaler computation.
Indeed, using get_cycles_per_sec in p…
-
Works perfect across the table on linux, but no matter what I try it won't work with windows (tried with avrdude [7.0](https://github.com/mcuee/avrdude/releases/tag/v7.0) and [7.2_mingw64.zip](https:/…
-
I have a [LoStik](https://www.crowdsupply.com/ronoth/lostik) and took some time to figure out how to get it to receive disaster-radio messages (and parse them). I figured this might be useful to someo…
-
I am trying to communicate two devices. One broadcasting based on Ra-02 Aithinker SX1278 433MHz using arduino-LoRa library (demo sender).
https://www.disk91.com/2019/technology/lora/first-steps-with…
-
SF値maxの12、TX_POWERもmaxの14dBm設定にて最大200m程度しか飛ばないとのこと。
-
Some AVR chips (e.g. ATMega328) has ADC noise canceller, which does ADC conversion when the MCU is sleeping to reduce noise. To start ADC conversion in this way, the ADC should be enabled in single co…
-
Hi LieBtrau,
I trust this message finds you well.
Allow me to express my utmost respect and admiration for your expertise and contributions in the field. Having followed your work for a consider…
-
Добавить в станцию отметки модуль NRF24L01, а чип изготовить на микроконтроллере NRF52832. Стоимость микроконтроллера 1$. Примерная стоимость изготовления чипа 2-3$, что в 20-30 раз дешевле чипа Sport…
-
I have the same error as in issue #3.
Now I could try to use a different timer on the tiny84, timer1 should be ok??
The problem is that, from the datasheet, I see the prescaler can only be: 1, 8, 64…
-
The idea is to use a Raspberry Pi (_or Arduino_) to power the RFID Reader for the Door(s).
The Raspberry Pi Zero W has the following _advantages_:
+ Cheaper (_**£9.16** per board_) ... see screens…