-
When I attach a (wireless) USB keyboard to the Ultimate 64 alomost all keys work just fine.
However the Run/Stop key is mapped to the pause/break key on the USB keyboard.
Unfortunately many keyboard…
-
As reported in this thread: on [Lemon64](https://www.lemon64.com/forum/viewtopic.php?t=74663),
it looks like Desterm128 v3 does not automatically recognize the ACIA emulation of the U2+ with firmware…
-
Consider the Fast IEC feature. You know, to realize this, the firmware simply writes the device ID of the IEC device into the kernal address $FF80. And unfortunately for every alternative kernal - eve…
-
An external USB keyboard has multiple additional keys over the native C64 keyboard (most notably the F9 to F12). As I find it somewhat inconvenient to dive in and press the power button hundred times …
-
The games start up image is shown but nothing else happens after that.
$ shasum SBB64K.crt
9cf83f7402fe01a107b839472a6d42e609b29aff SBB64K.crt
download game here (free) http://rgcd.bigcartel.co…
-
Hello,
Is it possible to adjust the timing for the NordicPower as well as for the old action replay MK5 modules? Because the SMD board version works.
thanks
Stefan
ghost updated
4 years ago
-
When using the builtin FC3 cartridge (DEC 1988), pressing Restore+button will freeze the C64 and start the FC3 freezer. Choosing "MONITOR" with F7 on the "EXIT" menu is supposed to start the built in …
paaco updated
4 years ago
-
If you switch the FPGASID via ConfiGuru from 6581 to 8580 and also flash the change of the config, the FPGASID will be deactivated after the next power cycle.
The reason is obvious, but from the po…
-
Here's the report David posted on fb:
"I have problem loading game with Ultimate II+ with Epyx Fastloader. Many games does not work with the Epyx Fastloader (maybe 20%) and it does not come from UII+…
-
After installing the new firmware for the Ultimate 64, I noticed that after a 'reset config' the default network host name has been changed to: "Ultimate 64"
According to [RFC-952](https://tools.ie…