-
Reading a 2-channel, signed 16bit PCM stream doesn't work (common) because the bytes are [converted to int32 instead of int16](https://github.com/cryptix/wav/blob/master/reader.go#L258)
n = i…
-
### Your question
"Hello! I'm using an Apple M1 chip, and I'm encountering MPS issues when running many nodes. Are there any solutions?"
### Logs
```powershell
!!! Exception during processing!!! Tr…
-
The symbols in .bss segment are ALWAYS 4 byte aligned. That is probably a mistake. Only 'LONG' should be aligned to 4 bytes (in 16 or 32 bit code that does not matter, by that way we will keep the mem…
-
1. Problem: Everything is fine when i use 16bit color depth sprite but if i try to use 4bit sprite it displays only on the top of the display.
I have a Lilygo T-RGB. It's resolution is 480x480 so G…
-
Saved files are always 16 bit unsigned integers. There's even a [TODO about it on the source]()
This is hardcoded in at least four places:
1. when computing number of bytes in a plane https://gi…
-
I was looking for drivers for the Tiny RTC module (DS1307 & AT24C32) and I noticed that the EEPROM AT24C32 does not have a i2cdevlib driver (yet). After some investigation I think I understand why.
…
-
It is useful to support writing 16bit PNG for:
* gltfutil(texture dumper)
* Serialize glTF
Extending `stb_image_write` looks rather complex, so our bet is using LodePNG.
syoyo updated
5 years ago
-
***Found that 8-bit images are not affected by this issue - current work around is to convert all 16-bit images to 8-bit***
- Txt2Img - works fine and no issues. (8bit & 16bit images)
- Img2Img …
-
The ADC maths can give a result of 0x10000, in which case the carry is correctly set but Z is not.
This causes a failure running ROMWBW.
The Z test needs to mask off bit 16 when adding a 16bit w…
-
Hi,
Thanks to all developers for the wonderful MicMac toolset!
I usually take photos with my Canon PowerShot SX260 HS. Thanks to CHDK I can safe raw images in DNG format and then dcraw enables m…