-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Marlin will not compile. Was OK immediately prior to the following change:
From:
#define…
-
Hi,
Is this project sill alive? Is the project completed so I can print it and it will work? Is there any documentation with some instructions and list with parts I need to print (I know it is wrot…
-
Hi All,
My new SKR mini E3 V1.2 works well except connecting to Cura.
I also tried different slicer with the same result.
There is an alarm sound coming from the board I guess and 'TMS connection…
-
My company bought a printer (Airwolf) that uses RAMBo v1.2. The usb interface worked initially then failed to connect. I had them send me a new board and traced back the problem in the failed board …
-
When I import the sorterplate.stl into Cura, it says the dimension is too late for my build area. I have an Ender 3 S1 Pro with a build area of 220x220x270. Was sure it would fit. Is there a smaller d…
-
the sensor has calibration modes for both distance offset, and crosstalk (reflections etc).
It might be nice to expose these in the interface.
-
Some printers' boards, such as for instance the Creality Ender 2, don't have RX/TX GPIOs for serial communication, which means this project cannot be used with them. As these are mostly inexpensive pr…
-
Hey GadgetAngel,
First off, you're build log is impressively detailed. Its been super interesting reading through it.
I was looking at your wiring harness image and found it extremely helpful. I'm p…
-
I followed the steps, compiled firmware with Marlin 2.0 en flashed the SKR mini E3 v1.2 and everything works fine. Auto home, printing.
But when the bed or nozzle starts to heat up the menu starts …
-
Any chance a row could be added to the top for F1-12?