-
Hi,
some help requested:
I try tui use Marlin 2.x with Tevo Nereus (MKS Nano). Sadly I had some shortcut/smoke on X-Axis stepper driver a4988. No Idea if the nano board survived this.
It boot…
-
It is (of course) up to you, but I would suggest combining some of the functionality of the 3 control boards you described into a single RPi Cape. If you include an Atmega/Attiny on the sensor array b…
-
I made a CNC machine myself.
Electronics : Arduino Uno + CNC Shield v3 + 4 A4988 moving 4 NEMA17.
The NEMA 17 are moving my axes with belts and pulleys. When mesured, each mm is 5 steps.
With $…
-
I have wired all components as per schematic, I then tried integrating using ESPhome, however after a failed attempt I read that the DRV8825 is unsupported by ESPhome, SO that means I need to go ardui…
-
Hello,
I have floppy disk arduino uno and ATX power supply.
The program on the arduino is working (tested with stepper motor and A4988 driver with Moppy Classic !)
and my floppy disk is powered and…
-
thank you for making this library and found your post on reddit!
I want to know how fast(maximum fast say for a 1.2A stepper motor with a4988 driver) and minimum rpm (slowest) it can go?
I read yo…
-
hello there, i've encountered a problem, i'm using Arduino CNC Shield V3.00 with A4988 stepper motor drivers. The arduino got flashed with GRBL already and its connected. Wiring and power already don…
ghost updated
4 years ago
-
Hello everyone
I have some issue like the following picture:
When I tried to control manually then got an error message "jog target exceeds machine travel. command ignored grbl gru"
By the way wh…
-
Just updated from one Allot's previous versions.
Steppers are noisy and it's printing at about half speed with this build. I'm thinking steppers are different.
My Sapphire Pro uses an MKS Robi…
-
Hi,
I think I've done everything. It's compiled with my WIFI credentials. What do I type into the web browser to find the web app?
Thanks