-
from @rtlsdrblog by mail:
> Regarding temperature: I did spend quite a lot of time investigating the thermal performance issues with the RTL-SDR. Mainly to solve the issues regarding L-band PLL lo…
-
Hi
i wanted to ask if there was any plan to introduce a HDL code to the Zynq to allow for sampling time alignment between mutiple pluto SDR's, as that would certainly be helpful for phase synchroni…
-
Looking forward to receiving data from your satellites! Congrats on getting to this point.
I have tried, but can't figure out how to input received data to the gs_parse_standalone.py script.
Co…
K4KDR updated
3 years ago
-
When running the application I get a segfault.
To make sure my command line parameters where not the reason, I also tried the example as shown on the git page.
All the following examples give a se…
-
Hi @mhennerich @tfcollins
I have a similar problem to the one in this thread. When i tried to use an external GPS clock with 40MHz output, and injected it to the pluto's CLK_IN and changed the xo…
-
Pretty much as the title says, I'm running into issues attempting to capture DroneID data (Occusync1.0/2.0) with the HackRF_One, irrespective of what I change with the configuration the width of the d…
-
Greetings!
I am currently working on using the rtl_433 on an Adalm-pluto. Whenever I try to do so, there are times where the software pushes through and manages to decode signals. However, most of …
-
This doesn't appear to be enabled currently in the latest MacOS builds (7.17.2) ?
I would like to see all of this in the MacOS builds if possible? :
* `libiio` enabled
* ADALM Pluto support enabl…
-
First thanks a lot for providing gr_SDRplay3. It must have cost you a lot of time.
For me using a single rsp-duo with 2 tuners works perfect.
But I have 3 RSPDuos and would like to use then for be…
-
I know the internal AD chipset permits a second RX channel---how difficult would it be to add support for this second channel? I have a Pluto+ (Chinese variant) with dual receive, and I was hoping to …