-
is ads1115
We've got an Error, Lance Constable Carrot!: Error: Cannot write to device
We've got an Error, Lance Constable Carrot!: Error: Error reading length of bytes
-
**Describe the problem you have/What new integration you would like**
Currently trying to use the CT_Clamp component with readings from an external ADC (ADS1115 device connected via I2C), yet …
-
Hi.
I had read viki and successfully configured compile flags to use i2c . I have BMP280 sensor and ADS1115 ADC connected to wemos d1 mini. Both of devices are working but I don't know how to calibra…
-
Sometimes Arduino stuck on
```
while (!conversionComplete())
;
```
I think the ads1115 not responding due to some AC spikes on the input.
I am planning to add time check also in the
``` while (!con…
-
With PID_USE_LOCAL_SENSOR for pid loop if the sensor is an AM2301 it does not pick up the sensor value.
In xdrv_92_pid.ino PID_Show_Sensor it explicitly looks for "DS18B20" in the json string. If the…
-
Hast du diesen thread gesehen wegen den gleichen Werten des Gas Sensors?
da hat jemand die Abfragezeit angepasst
https://forum.arduino.cc/t/ads1115-gives-the-same-value-on-every-input/539810/11…
-
Hello,
Good work.
Just reporting an issue seen on my old RPi B which use i2c bus0 /dev/i2c-0
ADS1x15.ADS1115(0, i2c_address) throws error /dev/i2c-1 not found
Seems to be due to early initialisa…
-
I'm very excited with this lib because I want to do a guitar with multi effects. But I just have an ESP32, and I think don't have audio read because the horrible integrated ADC. Is possible read audio…
-
For measurement of forward and reflected power we need at least two channels of ADC. The Pi has none, but it does have I2C.
Purchased an ADS1115 I2C 4 channel 16 bit ADC to trial. This should be ea…
M0LTE updated
2 years ago
-
The ESP32's ADC peripheral does not guarantee proper voltage detection throughout the voltage range. There have been some [discussions ](https://github.com/espressif/arduino-esp32/issues/92) about it …