-
### Describe the bug
@Ansuel
@robimarko
After the February 11 commits on snapshot
16364e410039a3806301338e3649d557a23deabd generic: 6.1: backport QCA807x PHY patches
1b931c33a28ee58cc19264203…
-
Hi,
i just tried to update my Ubiquity Unifi AP to 21.02.1 from older version (19.07.5) but i'm having issues
with ethernet port: it just doesn't work.
I'm able to connect using serial so i tried t…
-
*glycoknob:*
revision: trunk - r6755-d089a5d773
hardware: tp-link 841n-v8
build-configs:
https://github.com/weimarnetz/firmware/blob/master/configs/ar71xx_tiny.config
https://github.com/weimarn…
-
I am trying to construct an ad-hoc network using two COMFAST CF-E313AC units. I flashed them with OpenWRT and configured them to work in IBSS mode, without using any wireless encryption. The two units…
-
*glycoknob:*
revision: trunk - r6755-d089a5d773
hardware: tp-link 841n-v8
build-configs:
https://github.com/weimarnetz/firmware/blob/master/configs/ar71xx_tiny.config
https://github.com/weimarn…
-
*Alfredoredo:*
- Device: TP-Link RE450 v3
- OpenWRT-version: OpenWRT SNAPSHOT r14198-da98603597 (snapshot from 8/19/2020)
- Installed packages: Just the base install + LuCI
- Steps to reproduce:…
-
Hello everyone, here I add a w83795adg and two temperature sensors on it, but they have no effect.I checked the experience of other people in the list and found that my / sys / class / hwmon did not g…
wws66 updated
4 years ago
-
*sinancetinkaya:*
Supply the following if possible:
- Device problem occurs on
root@OpenWrt:~# cat /etc/*-release
NAME="OpenWrt"
VERSION="SNAPSHOT"
ID="openwrt"
ID_LIKE="lede openwrt"
PRETT…
-
I try to boot Cubieboard 1 with initramfs, but system doesn't start. MMC doesn't show in /dev and manual created node doesn't work (when try to mount created node:no such device or address). This same…
-
I am having very intermittent stability issues using both Caraboot and pepe-2k.
Both u-boot versions assume a tRAS value of 40 ns
This was true when the Carambola2 module used the W9751G6JB25 DDR2 m…