-
Having no previous experience with the Sector integration, I don’t know what to expect in terms of functionality. But I would think that there should be more devices than the Hub and the alarm panel, …
-
Is it possible to see and/or manipulate the the setting that plays a chime from the alarm panel when opening or closing a door or window?
-
Looks like HA is printing these warnings for the alarm panel pro and the garage opener (same message).
```
2023-11-19 10:31:28.264 WARNING (MainThread) [homeassistant.components.sensor] Entity sen…
-
Hi
Thanks a lot for this ESPhome code. It seems that my gate is wired through the alarm system (I can currently use the same remote to open the gate and arm/disarm my alarm), and so is my intercom/be…
-
## Alarm system
EVO192, FW is 6.86 , connection method is Serial over IP with ESP8266 -->
## Environment
##Configuration
```
LOGGING_FILE: null
LOGGING_LEVEL_CONSOLE: 20
LOGGING_LEVEL_F…
-
Any time the alarm is used, the notification on Homekit is taking a long time, and for example the automatizations are not done at the same time if I use as a trigger the activation of alarm, to close…
-
For example, the 0x05 that reports Armed:Stay gets skipped.
As a result, web_keypad never gets updated to show the correct status.
Commenting out the DEBOUNCE define restores the expected behavior.
…
-
Hello,
I got status from my alarm in home assistant and I can disarmed my alarm from home assistant too.
But I can't arm my alarm from home assistant.
No log when I do it.
But when I start HA I …
-
### Feedback
The example https://www.home-assistant.io/integrations/lawn_mower.mqtt/#example has "alarm_control_panel" rather than "lawn_mower" in it
### URL
https://www.home-assistant.io/integrati…
-
The Sector Alarm application allows you to activate a quick mode that does not require a code to activate the alarm.
As an improvement, I suggest checking if this mode is activated and bypassing the …