-
### Describe the bug
If I make a "bar" object and set it min:0, max:5 and have a value of 0.000.99, nothing is displayed. 1.0> already jumps to the right part of the bar. Also, when "radius" is appli…
-
On my iDRAC7s with the last available firmware (2.65.65.65) the OID for system-watts appears to now be
1.3.6.1.4.1.674.10892.5.4.600.30.1.6.1.2
The corresponding amperage reading is just before…
-
The first e-mobility providers that have shared an OCPI end-points are Neogy and Driwe.
Reference specifications for the implementation of an OCPI-compliant Data Collector are provided in the specifi…
-
Hi,
Is there a way to specify max power consumption per each strip? I have 2 strips who are powered by two different power supplies, with different amperage capabilities. I was able to specify how …
-
If Battery C needs to be charged, and the charger is turned on, it indicates charging amperage. However if you switch panels in 2D and return to MDC3 it reads zero. You can turn off the charger and ba…
-
This picks up application-specific changes to SteVe which support communication with an external smart charging logic module (e.g. load management). As suggested by @goekay at https://github.com/RWTH-…
-
At one point, strange smell wafted into the cabin that I suspect was based on every device port being in use. No heat issues or smoke but it was a funny smell.
## To Reproduce
Steps to reproduce t…
-
### Variant
ADC
### Control type
FOC
### Control mode
Torque
### What can we do to make the firmware better?
Hello everyone, good work and big efforts you doing,
Excuse me, I’m using Hoverboar…
-
**Reported by:** [marcioprado](https://github.com/marcioprado)
**Original Ticket:** [ipmitool/bugs/487](https://sourceforge.net/p/ipmitool/bugs/487)
I created an application using ipmitool to monitor…
-
Charging amperage should be set based on the adapter supplied:
It has a sensing pin, but I don't know if it is connected:
```
65 W 10 kΩ
90 W not connected (infinity)
135 W 0 Ω
170 W 1.5…