-
Dear spthm,
First of all thanks for sharing this asyncio wrapper for pigpio.
I've run into some trouble using the EXAMPLES/Python/PCF8591_YL-40
When I run it I'm encountering the following …
-
I was building this for my SteamDeck and noticed that during compiling, it was building things like drivers for Wifi Chipsets the Steamdeck doesn't have, as well as things like Nouveau.
Would it ma…
-
I'm looking for some help finding the setting which sends mqtt status updates every 10 minutes. Where is that setting stored?
Here's my sub showing the 10 minute timestamps:
```
2023-06-27T08:4…
-
- [x] Create manifest (https://github.com/Halium/halium-devices/pull/35)
- [x] Boot image and system image build successfully
- [x] Device boots into rootfs, `usb: Manufacturer: GNU/Linux Device` ap…
-
### The problem
Hello,
the AS3935 from DFRobot [Link](https://www.dfrobot.com/product-1828.html) not be found under ESPHome.
On the same board with ESPEasy and Tasmota this sensor is found with an …
-
As discussed on ##linux-surface, hardware buttons on some Surfaces are not working. Reloading the button module works post-boot:
```
sudo modprobe -r soc_button_array
sudo modprobe soc_button_array…
-
**Describe the bug**
The wifi device doesn't appear with `ip a` command.
Failed to run INIT ucode: -110
`dmesg |grep iwlwifi` gives:
```
[ 4.150315] iwlwifi 0000:00:0b.0: can't derive rout…
-
Hi, as you wrote in the Wiki, you also like to add the lightning sensor.
As there seems to be no reaction at https://github.com/merbanan/rtl_433/issues/2140, i like to share my first tests decoder wi…
-
Hello Nick,
thank you very much for the great weewx-skin. Especially the history generator is a nice tool. Lately I added a lightning detector to my raspberry and added the "AS3935 Service" to weewx.…
-
### The problem
After upgrade to 2022.3.0 (from 1.16), i noticed that my esphome device doesn't boot (ends in safe mode). After try&error, i figured out that disabling as3935 solves the issues.
###…