-
## Description of the problem
Dynamic VLAN breaks IPv6 (tested with macOS Catalina and iOS 13 clients -- neither works). IPv6 works without dynamic VLAN enabled, and IPv4 and VLAN assignment work w…
dhess updated
2 years ago
-
*luizluca:*
I have a TP-Link Archer C7v4 with 21.02. After 21.02 upgrade, ath10k firmware started to crash in loops. I get a lot of logs,
[11487.634801] ath10k_pci 0000:00:00.0: device successfull…
-
*damnms:*
Supply the following if possible:
- Device problem occurs on
SolidRun Clearfog Pro A1
- Software versions of OpenWrt/LEDE release, packages, etc.
openwrt branch 21.02
- Steps to…
-
[ 7.654168] ath10k 5.4 driver, optimized for CT firmware, probing pci device: 0x46.
[ 7.654188] ath10k_mac_create, priv_size: 1624 hw: 0000000005a90f46 hw->priv: 00000000648ef469
[ 7.6583…
-
This is the wrong place to publish the QCA firmware binaries. See https://lore.kernel.org/all/bac97f31-4a70-4c4c-8179-4ede0b32f869@quicinc.com/ for the information how ath10k/ath11k/ath12k/... firmwar…
-
*msoltyspl:*
Model ZyXEL NBG6817
Architecture ARMv7 Processor rev 0 (v7l)
Firmware Version OpenWrt SNAPSHOT r9010-adc8b374e3 / LuCI Master (git-19.007.66460-4edac36)
Kernel Version 4.14.91
Local …
-
ipq4019 5.8G wifi The rate is too slow How to increase speed ?
kmod-ath10k-ct......... ath10k-ct driver optimized for CT ath10k firmware
[*] Enable LED support …
-
I am in Ubuntu 18.10 and did not change its kernel (4.18). After inserting my USB dongle, `lsusb -t` shows me that no driver is attached. Then I removed the dongle and went for:
```
sudo modprobe at…
traud updated
4 years ago
-
Netgear 7800 - OpenWRT - Build info below crash log:
[354147.746549] ------------[ cut here ]------------
[354147.746661] WARNING: CPU: 0 PID: 9 at backports-5.7-rc3-1/net/mac80211/sta_info.c:1929…
-
Themes to be an bug/issue with the ct drivers.
If you change from:
ath10k-firmware-qca988x-ct kmod-ath10k-ct
to:
ath10k-firmware-qca988x kmod-ath10k
the mesh within the 5HGZ is working as w…