-
I think this may not be a real issue but kind of strange behavior of the optiboot bootloader firmware.
I jusgt bought a few Uno Clones with CH340. Apparently due to chip shortages the boards come w…
-
Hello,
using XUbuntu 22.04 LTS, Arduino IDE 2.0.0-rc8 and megaTinyCore 2.5.11 editor suggestions do not work for the following board entries:
```
ATtiny3224/1624/824/424 w/Optiboot
ATtiny3226/16…
-
https://github.com/avrdudes/avrdude/issues/1071#issuecomment-1220886097
From @dl8dtl
> I think it was always the case that JTAG could not write 1s to EEPROM.
I think avrdude documentation need…
-
Just got a serial port AVR910 prog (based on AT902313 and use some passive components for the serial interface) from AliExpress (along with a serial port based SI-Prog).
Currently avr910 only supp…
-
Tue 21 Sep 2004 07:49:25 PM CEST
Attached is the IO header file for the new ATmega165 device: iom165.h
[file #7876: iom165.h](https://savannah.nongnu.org/patch/download.php?file_id=7876)
[file #7878…
-
Fri 04 Mar 2005 07:35:56 PM CET
Add support for mega165 to binutils and gcc. Support for the mega165 already seems to exist in avr-libc.
This issue was migrated from https://savannah.nongnu.org/task…
-
Mon 20 May 2013 02:18:51 PM CEST
This patch corrects wrong sleep mode groupings in sleep.h.
In particular
1. Extended sleep mode is not supported by atmega165a/165pa/325a/325pa/3250a/3250pa/645a/64…
-
Thu 08 Apr 2004 07:38:20 PM CEST
These patches add the underlying support to binutils, gcc and avr-libc to allow support for these new AVR devices:
tiny13
tiny2313
at90can128
mega48
mega88
mega168
…
-
Sun 24 Dec 2006 07:52:44 PM CET
Patches to add ATmega3290P device to binutils, gcc.
[file #11595: gcc-4.1.1-atmega3290p.patch](https://savannah.nongnu.org/patch/download.php?file_id=11595)
[file #11…
-
Just for fun, I tested the avrdude.conf file Arduino IDE ships with, and it appears that it has a few errors in it. None of them are crucial when using official Arduino hardware. Wouldn't it be better…