-
Hey everyone. I just want to start by saying thank you for this super cool library, it's one of a kind and really helps expand the capabilities of most Arduino boards!
I wanted to use it with an Ardu…
-
Reference:
* https://github.com/avrdudes/avrdude/pull/1113#issuecomment-1271647912
Interestingly for my Arduino Nano ATmega4808, it can not write EEPROM in terminal mode.
```
PS C:\work\avr\a…
-
Hi
First of all, many thanks for your work!
I'm starting with the Atmega4808 and I'm studying your library and pinouts. There is one thing which confuses me a bit.
To start with, I will use a boa…
-
I am using avrdude with a Microchip Snap Debugger as a UPDI programmer only (no debugging).
Everything works really well with the SNAP programmer with only one exception:
If you program the lock bit…
-
For some reason, the serial number string is blank with the SNAP and PICkit4.
It does however work with pkobn_updi (nEDBG) and mEDBG boards.
@janegilruud is there a different command we have to us…
-
I have a board with an ATmega4808 chip on it, and it has a serial port connected to UART1. When I program my board from the IDE, everything works as expected with any internal clock speed I pick. If …
-
I will need to debug further why this happened. It may have something to do with my paticular system and not avrdude.
From here:
* https://github.com/avrdudes/avrdude/issues/1038#issuecomment-135…
-
It would be great to provide urboot hex files for non-default serial port. I think this is one of the major missing feature from urboot.
As per the previous discussions in avrdude, it may not be so…
-
From here by @stefanrueger
https://github.com/avrdudes/avrdude/pull/1125#issuecomment-1280512460
> Mixing the progress bar with warning messages is a really hard task: I have added code elsewhere t…
-
When a device is programmed with a JTAG3-compatible programmer, Avrdude prints out some programmer-related information in verbose mode, like serial number and firmware version. However, this does not …