-
Hi,
I am a newbie in MCU programming yet have ATTiny10 on shelf.
Is it possible to release example projects teaching features like Capacitive Touch Sensing (QTouch® Library) and PWM, as in One but…
-
Hello i have tired everything to get this attiny10 working with the arduino uno board and IDE. however i get this error when trying to complete it.
Sketch uses 428 bytes (41%) of program storage sp…
-
Since I have upgraded to mac os 11.5 BigSur Arduino is not longer compiling code (in my case) for ATTINY10.
Following error shows up: "fork/exec /Users/myusername/Library/Arduino15/packages/arduino/…
-
Power enable inputs on the 2V8 and 1V2 LDO's are constrained to VCC+/-0.3V.
Texas Instruments has a pin compatible part (TPS7A20) that has a more tolerant input. Alternativley the ATtiny10 could be…
-
I'm trying to use your IDE to build my ATTiny10 OSH project under Windows 10 that I can only build successfully under either OSX or Debian using the avr-gcc toolchain.
The firmware is available at:…
-
For some reason, the avr-gcc compiler included with recent avr board installs fails to compile code for ATtiny10, getting messages about missing and/or incompatible libraries. The libraries do seem t…
-
I imagine that there are AVR devices which have IO ports where only half of the bits are actually connected to pins.
We might want to look into something like defining `PB1`, `PB2`, ... registers f…
-
A lot of registers give their bits names such as
```
#define PORTB0 0
```
That is mildly useful in such as the *absence* of that definition tells me that this bit isn't used or might be reserve…
-
I would like to suggest several projects that it would be fun to see in pdk:
https://www.quinapalus.com/picsi.html
https://www.dos4ever.com/uscope/uscope_e.html
BTW Thanks for noiseplug ;)
-
Hi. I want to use timer0 to generate ISR with 75392 frequency. It will be used to bit-bang two signals on PB0 and PB1. One will be constant 589 Hz sound and another is 4712Hz PWM signal to generate v…