-
As you know I am very new to Rust language. With your help I just setup Rust environment couple of days ago.
Now I have new feature request. I was searching for IR transmitter solution for CH582F i…
-
Hi!
I have a few questions regarding the PicoBootSerial bootloader, and possibly integrating it with Avrdude, which by the way has [migrated over to Github](https://github.com/avrdudes/avrdude) and…
-
If millis() function appears anywhere in loop(), it prevents enetering to sleep mode. The position of millis() doesn`t matter, it could be after sleep_cpu().
micros() works normally.
```
#inclu…
-
i upload code to attiny13 9MHz success. but led in pin 0 not blink. it always on.
-
I made this tiny device just now, I have replaced 1220 battery by rechargeable lion battery 3.7V, but the buzzer did not work, and the same time, I found the typical application circuit from manual of…
-
Hello,
Please add a makefile to make life easy :
```
MCU=attiny13
F_CPU=9600000UL
CC=avr-gcc
OBJCOPY=avr-objcopy
AVRSIZE=avr-size
CFLAGS=-std=c99 -Wall -g -Os -mmcu=${MCU} -DF_CPU=${F_CPU} -…
-
```
I want to make Tiny13A core with Tiny Arduino!
TINY13A core summary
MAX Frq 20Mhz
1KB FLASH
64byte EEPROM
64byte SRAM
Do you know how to make TINY13A core Arduino Tiny ?
```
Original issue rep…
-
```
I want to make Tiny13A core with Tiny Arduino!
TINY13A core summary
MAX Frq 20Mhz
1KB FLASH
64byte EEPROM
64byte SRAM
Do you know how to make TINY13A core Arduino Tiny ?
```
Original issue rep…
-
Hi,
I have tried flashing the sketch on attiny13a chip with the fuses set as lfuse 0x7A and hfuse 0xFF, however the sketch doesn't seem to work and the led on PB4 remains off all the time. The conn…
-
cannot play the game as it is mising the motion pak
