-
Freshly FAT32 formatted 2GB sdcard. v0.90.1723. Copied content of zip'd folder to root of sdcard. Boot Pi Zero W (original, not ver 2). Receive the four colored squares and then no sdcard access. …
-
I hacked together a thing where Alexa can control my TV which involved doing a few things I haven't done before, which may make good blog posts:
1. Running a NodeJS app on a Raspberry Pi / Linux se…
-
@tatobari hx711 for raspberryPi working Fine.
Same code with hx711 -for jetson nano getting random values on adding or removing weight.
I am stuck here. Could you please help?
board used - Jetson …
-
If we ever want to build for raspberry PI or any other non amd64 based platform, we should enable `buildx`.
One way to achieve this would be by using the following workflow:
```
name: Set…
-
# Bug #
Usually on the first run of ignition it fails with the swap device unit timing out. After that, if I power-cycle, on the second boot Ignition will go though without errors.
The problem s…
-
Firstly, thank you for this repo. It saved me a ton of time. 👍🏾 (I'm posting this as an issue as I couldn't find a discussions tab)
I'd like to make a suggestion - can we split the `FAT filesystem …
-
I know this isn't a priority, but I thought I'd get the issue down in writing for tracking purposes.
# Summary
## Problem
The crate is currently incompatible with [no_std](https://docs.rust-e…
-
Hello,
thanks for maintaining the docker containers.
I would like to install Odoo 15 or 14 on Raspberry pi. It seems that it is not compatible with Arm structure.
Error :
```14.0: Pulling from l…
-
First of all, say thanks for the big effort done in the development of this project.
is it any schedule or improvement in this project?
asking that because should be fine to have a complete supp…
-
I have successfully download the code from github.com. However I do not know how to build the code, not to mention how to use it.
Can anyone tell me specifically how I can build the code and use it i…