-
After discussing with @RobertCNelson, I have learned that pwmchip numbering in Linux is not deterministic. Therefore, the mapping between a pin and the pwm chip/channel can change between boots:
```…
-
We need to make sure our entire codebase as a whole can be deployed onto the Beaglebone and can run (all threads operational / running as placeholders).
-
i am trying to write a w5500driver with machinekit on beaglebone for ethercat, but in kernel 4.9, the slave can't be found. in kerle 3.8 igh could find the slaves using generic driver.
I saw you have…
-
Observing behavior where VM server starts OOM-killing near the end of our experiments due to apparently infinite creation of VMs. Log tail looks like:
```
Aug 20 11:08:22 beaglebone python3[490]: IN…
-
On the Beaglebone Green it turns out that GPIO pins start already exported. This causes Gobot to fail on the first run because it can't export the already exported pin. However, once Gobot shuts down,…
-
I am trying to get audio to output on the I2S port with a Beaglebone Green Wireless. I have installed the Debian 8.6 2016-11-06 4GB SD SeeedStudio IoT image and run apt-get update/upgrade. I have also…
-
Just tested compilation of the application on the Beaglebone Green. Here is what happened:
``` shell
adam@beaglebone:~/vivaplanet-java/src/vivaplanetjava0$ javac DeviceReport.java Sensors.java Viva…
-
Test software on Ubuntu/Beaglebone to see if it works.
* Background notes: https://wiki.openag.media.mit.edu/contributors/replacing_arduino_and_raspberry_pi?s[]=beaglebone#beaglebone.
* Status: ex…
-
Moved from https://github.com/platformio/platformio-core/issues/1635
/cc @Dileepkv
---
Want to back this issue? **[Post a bounty on it!](https://www.bountysource.com/issues/58850284-add-sup…
-
We tried to duplicate your pocket Hardware.
Our produced board:
When power is connected, only one LED comes up
Original Pocket Beagle:
When power is connected, only one LED comes up and then other…