-
Bought BIGTREETECH SKR Mini E3 V3.0 from BIGTREETECH store on Amazon UK
Connected board and Marlin was showing fine and I could probe the MCU from the pi via USB. Downloaded the correct prebuilt fi…
-
Hi,
I get under Marlin 2 no UART connection to the TMC2208 drivers.
The jumpers on the board are set correctly.
The TMC2208 version 3 should not require solder bridges either.
Various settings in …
-
Has anyone tested SKR-E3-Turbo in a Creality CR-10 or Ender 3 with TMC2209 sensorless homing + BLTouch + original display?
Thinking that could take this configurations example and use as a base for…
Hedda updated
3 years ago
-
@bigtreetech
On the enclosed documentation for TFT 35 V3.0 (TFT35 V3.0-PIN.pdf),
is an incorrect description of the RS232 connector.
![image](https://user-images.githubusercontent.com/46979052/1…
-
cp2102 was connected to TFT port of SKR Mini.
Each time after reset/power on i see:
> res=0
> SD їЁ№ТФШіЙ№¦ЈЎЈЎЈЎ
> Total Size: 119 MB
> Free Size: 119 MB
> Чј±ёЅшИлBootLoader
> ґтїЄОДјюіЙ№¦
…
-
I've had a really hard time getting firmware for the BTT skr mini e3 v3.0.1 for the Ender 6.
This repo only goes up to the Ender 5.
It would make my day if there was some available firmware for…
-
Designed for the Positron V3.2, this [CM4 head unit](https://kb-3d.com/store/positron/1555-ldo-35-controller-touchscreen-for-positron-v32-3d-printer-1725634442949.html) includes a spot for a CM4 Chip,…
-
https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/blob/b934d99e8bf8ba63c65cd2d8ab613fe5cf23c49c/firmware/smoothieware%2BTFT35/config.txt#L195
-
I noticed there is source code for Marlin (https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/tree/master/firmware/Marlin-bugfix-2.0.x), but there is no source code for Smoothieware+TFT35 (https://gi…
-
![K-Touch illustration](https://github.com/user-attachments/assets/1dd0942a-8a4a-477f-b155-baeb3c70596a)
Add a horizontal print status bar.