-
Hi,
I keep getting the error "Couldn't receive packages from the device" while trying to read the flash from a bulb.
Tried selecting **BK7231N - Variant 1 ( Standard)**, **BK7231N - Variant 1 ( XO…
-
**Describe the bug**
After i erase all flash via BK7231 GUI tool and flash the firmware. I set SSID and password to connect but it can't. I've tried change MAC and restore RF part but it sill not wor…
-
Is it possible to use `ltchiptool` with `bk7238` SoC?
I tried with no luck on macOS:
```
% ltchiptool flash read --device /dev/cu.wchusbserial110 bk7231n bk7238-entire-flash.bin
I: Connecting …
-
I just found https://github.com/libretiny-eu/libretiny that make platformio support bk7231.
-
I tried to flash a RTL8710BN and I couldn't open the web server view to check for the pins inputs/outputs or update OTA.
Also the device was not discovered automatically in the esphome web view. The …
-
**Describe the bug**
I have a smart plug(not Tuya version) with cb2s module ,but the module is using a BK7231M.
I try to flash it with ltchiptool,but i get CRC error at 28%, never success,then I try…
-
Hello cloudcutters,
I'm very new to this - recently bought a cheap Tuya bulb from AliExpress:
https://www.aliexpress.com/item/1005006253955848.html
It was just around 3 bucks (with choice) and …
-
**Describe the bug**
I soldered the pins it took the dump with BK7231Flasher and flashed with "OpenBK7231T/OpenBeken" flash is success, but still no Wifi OpenBK AP.
**Firmware:**
- Version 3.2…
-
Hi -
I am repurposing a generic white label Tuya sensor by changing the BK7231 module out for an ESP32-C3 module, and running custom Ardunio code. The sensors I have use a CHT83**10** chip.
I f…
-
Hi.
I purchased BHT-002-GCLW and I have a problem communicating with it.
```
tomik67@tomik67MINT ~ $ esptool -p /dev/ttyUSB0 -b 460800 read_flash 0x00000 0x100000 originalFirmware1M.bin
esptool.…