-
### Make sure you are using the *latest* version: run `youtube-dl --version` and ensure your version is *2018.07.21*. If it's not, read [this FAQ entry](https://github.com/rg3/youtube-dl/blob/master/R…
-
Can you upload the schematic and how to upload code for stm32f103c8t6 bluepill? I want to make 16 buttons from note 36 to 51 can you give me the code of that?
-
@prenticedavid hello!
Please help me.
I've changed board from a stm32f103c8t6(bluepill) to stm32f401ccu6(blackpill).
Connected blackpill as bluepill:
```
//LCD pins |D7 |D6 |D5 |D4 |D3 |D2 |D1 |…
-
Hi, wonder if you would like to host our Grbl port to ARM STM32F103?
Thanks,
Paul (awesome.tech)
-
Hello
In the HS402 oscilloscope with firmware version 1.5, crosstalk is created between the channels.
If both channels are enabled in the app, part of the signal connected to one channel is visible …
-
I want to set the master side defining the SPLIT_HAND_PIN [as the documentation says](https://docs.qmk.fm/#/config_options?id=defines-for-handedness).
Is this possible? and which pin of the microco…
-
Hello.
First, thank you very much for all the work you do for this project!
I'm looking for a project that can be used as an electronic lead screw for the lathe with CNC capabilities, so the lathe c…
-
Hi and thanks for the library!
Do you know if it is compatible with [SPL06-001](https://datasheet.lcsc.com/lcsc/2101201914_Goertek-SPL06-001_C2684428.pdf)? From the datasheet I didn't find major diff…
-
When trying to send USB HID commands, the controller reboots.
See [This live stream for real time example]( https://www.reddit.com/rpan/r/shortcircuit/jvum89)
Now, for more details on the issue.…
womei updated
3 years ago
-
I try to build a Plasma cutter with a STM32F411 "blackpill" .
It skd looks like working a bit, but does not really match the expectations from documentation and source code.
The pattern is similar…