-
I'm using a 10 MHz external reference and need the bladeRF to enable the PLL so it considers it. Given `setClockSource` does nothing by default and I didn't find any option to enable the PLL, I had to…
-
Hello,
I try to install gnuradio 3.7.4 and gr-osmosdr branch gr3.7
After make -j4 i got this errors
![image](https://user-images.githubusercontent.com/22875168/102715126-cbd5f580-42db-11eb-8d…
-
I tried your repo, but keep getting kismet error message :
FATAL: Datasource helper(bladerf-wiphy) failed, could not process incoming control packet.
Im running latest dragon os with kismet nightly …
-
There are some issues with smartjam_rpcclient, but I can't find what is wrong. Previosly, cells.json saved from Samsung S5 was ok to use, if all running with bladeRF, no success.
After correcting p…
-
Hi, after running cmake ../ and make sdr_power gives unsupported radio for the bladeRF.
bladeRF-cli shows the radio is online.
Any help ?
Thanks,
Ben
zanco updated
8 years ago
-
## Issue Description ##
After running this: sudo srsepc
When I run this command: sudo srsenb after a while it gives this message "00000000000000000Error - buffer pool is empty" and the same thing c…
-
## Issue Description ##
Seem to be unable to sync to SFN with bladeRF micro 2.0 xA5.
## Setup Details ##
- Install bladeRF native drivers and srsRAN 21.10
- Connect bladeRF via USB3.0
- Run s…
-
Greeting. I am trying to follow this ADSB implementation but when trying to "make" I get the following error message (Mac OS X El Capitan, gcc (MacPorts gcc5 5.4.0_0)):
gcc -o bladeRF_adsb bladeRF_ad…
-
Hi.
I have BladeRF xA4.
In my tests I want to play a bin-file with sinusoidal signal by BladeRF device with sampling rate 100 MSp/s.
But it can plays only on 80 MSp/s with no signal interruptions.
…
-
I am trying to obtain longitude and latitude from the recorded GPS signal with BladeRF.
I have trouble decoding it with GNS-SDR v0.0.10. on ubuntu 18.04
Antenna 17dB gain. The IQ signal looks pre…